134 research outputs found

    SP-0406: SBRT for metastatic disease: how far can and should we go?

    Get PDF

    Systemic and gut mucosal immunity to tissue transglutaminase in coeliac disease

    Get PDF

    The microwave properties of tissue and other lossy dielectrics

    Get PDF
    This thesis describes work on the theoretical modelling and experimental measurement of the complex permittivity of dielectrics. The main focus of research has been into the characterisation of permittivity of planar and layered samples within the millimetre wave band. The measurement method is based on the free-space measurement of the transmission and reflection coefficients of samples. A novel analytical method of determining the transmission and reflection coefficients as functions of frequency arising from a generalised structure of planar dielectric layers is also described and validated. The analytical method is based on signal flow techniques. The measurement and analytical techniques have been applied in two main areas: firstly, the acquisition of new data on human skin in the band 57 to 100GHz and secondly, the detection and location of defects in composite materials for which a band of 90 to 100GHz was used. Measurements have been made on the complex permittivity of a single sample of excised human skin fixed in formaldehyde. The experimental results have been corrected to account for the fixing process in formaldehyde and are projected to body temperature. This data is, to the best of the author’s knowledge, the first of its kind to be published. Predicted skin permittivity based on various relaxation models varies widely and only partially fits the measured data. The experimental results have been used to determine the parameters of a Cole-Cole function which gives the best fit to the measured data. The measured skin data has also been used to calculate power deposition in skin exposed to millimetre wave radiation. This work concludes that a skin surface temperature rise of only 0.20C results from a thirty second exposure to signals of 100W/m2. Experimental work with fibreglass composite samples has shown that defects such as delaminations, voids, matrix cracks and improper cure result in resolvable differences in the dielectric properties of the samples at 90 – 100GHz. The measurement technique is particularly sensitive to the detection of cracks and its spatial resolution is 20mm or better. Whilst confirming the general conclusions of previously published work, the specific findings of this study are novel.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

    Developing a methodology for three-dimensional correlation of PET–CT images and whole-mount histopathology in non-small-cell lung cancer

    Get PDF
    Background: Understanding the three-dimensional (3D) volumetric relationship between imaging and functional or histopathologic heterogeneity of tumours is a key concept in the development of image-guided radiotherapy. Our aim was to develop a methodologic framework to enable the reconstruction of resected lung specimens containing non-small-cell lung cancer (NSCLC), to register the result in 3D with diagnostic imaging, and to import the reconstruction into a radiation treatment planning system. Methods and Results: We recruited 12 patients for an investigation of radiology-pathology correlation (RPC) in NSCLC. Before resection, imaging by positron emission tomography (PET) or computed tomography (CT) was obtained. Resected specimens were formalin-fixed for 1-24 hours before sectioning at 3-mm to 10-mm intervals. To try to retain the original shape, we embedded the specimens in agar before sectioning. Consecutive sections were laid out for photography and manually adjusted to maintain shape. Following embedding, the tissue blocks underwent whole-mount sectioning (4-μm sections) and staining with hematoxylin and eosin. Large histopathology slides were used to whole-mount entire sections for digitization. The correct sequence was maintained to assist in subsequent reconstruction. Using Photoshop (Adobe Systems Incorporated, San Jose, CA, U.S.A.), contours were placed on the photographic images to represent the external borders of the section and the extent of macroscopic disease. Sections were stacked in sequence and manually oriented in Photoshop. The macroscopic tumour contours were then transferred to MATLAB (The Mathworks, Natick, MA, U.S.A.) and stacked, producing 3D surface renderings of the resected specimen and embedded gross tumour. To evaluate the microscopic extent of disease, customized "tile-based" and commercial confocal panoramic laser scanning (TISSUEscope: Biomedical Photometrics, Waterloo, ON) systems were used to generate digital images of whole-mount histopathology sections. Using the digital whole-mount images and imaging software, we contoured the gross and microscopic extent of disease. Two methods of registering pathology and imaging were used. First, selected PET and CT images were transferred into Photoshop, where they were contoured, stacked, and reconstructed. After importing the pathology and the imaging contours to MATLAB, the contours were reconstructed, manually rotated, and rigidly registered. In the second method, MATLAB tumour renderings were exported to a software platform for manual registration with the original PET and CT images in multiple planes. Data from this software platform were then exported to the Pinnacle radiation treatment planning system in DICOM (Digital Imaging and Communications in Medicine) format. Conclusions: There is no one definitive method for 3D volumetric RPC in NSCLC. An innovative approach to the 3D reconstruction of resected NSCLC specimens incorporates agar embedding of the specimen and whole-mount digital histopathology. The reconstructions can be rigidly and manually registered to imaging modalities such as CT and PET and exported to a radiation treatment planning system

    Predictors of Radiotherapy Induced Bone Injury (RIBI) after stereotactic lung radiotherapy

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>The purpose of this study was to identify clinical and dosimetric factors associated with radiotherapy induced bone injury (RIBI) following stereotactic lung radiotherapy.</p> <p>Methods</p> <p>Inoperable patients with early stage non-small cell lung cancer, treated with SBRT, who received 54 or 60 Gy in 3 fractions, and had a minimum of 6 months follow up were reviewed. Archived treatment plans were retrieved, ribs delineated individually and treatment plans re-computed using heterogeneity correction. Clinical and dosimetric factors were evaluated for their association with rib fracture using logistic regression analysis; a dose-event curve and nomogram were created.</p> <p>Results</p> <p>46 consecutive patients treated between Oct 2004 and Dec 2008 with median follow-up 25 months (m) (range 6 – 51 m) were eligible. 41 fractured ribs were detected in 17 patients; median time to fracture was 21 m (range 7 – 40 m). The mean maximum point dose in non-fractured ribs (n = 1054) was 10.5 Gy ± 10.2 Gy, this was higher in fractured ribs (n = 41) 48.5 Gy ± 24.3 Gy (p < 0.0001). On univariate analysis, age, dose to 0.5 cc of the ribs (D<sub>0.5</sub>), and the volume of the rib receiving at least 25 Gy (V<sub>25</sub>), were significantly associated with RIBI. As D<sub>0.5</sub> and V<sub>25</sub> were cross-correlated (Spearman correlation coefficient: 0.57, p < 0.001), we selected D<sub>0.5</sub> as a representative dose parameter. On multivariate analysis, age (odds ratio: 1.121, 95% CI: 1.04 – 1.21, p = 0.003), female gender (odds ratio: 4.43, 95% CI: 1.68 – 11.68, p = 0.003), and rib D<sub>0.5</sub> (odds ratio: 1.0009, 95% CI: 1.0007 – 1.001, p < 0.0001) were significantly associated with rib fracture.</p> <p>Using D<sub>0.5,</sub> a dose-event curve was constructed estimating risk of fracture from dose at the median follow up of 25 months after treatment. In our cohort, a 50% risk of rib fracture was associated with a D<sub>0.5</sub> of 60 Gy.</p> <p>Conclusions</p> <p>Dosimetric and clinical factors contribute to risk of RIBI and both should be included when modeling risk of toxicity. A nomogram is presented using D<sub>0.5</sub>, age, and female gender to estimate risk of RIBI following SBRT. This requires validation.</p

    Stereotactic ablative radiotherapy for comprehensive treatment of oligometastatic tumors (SABR-COMET): Study protocol for a randomized phase II trial

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Stereotactic ablative radiotherapy (SABR) has emerged as a new treatment option for patients with oligometastatic disease. SABR delivers precise, high-dose, hypofractionated radiotherapy, and achieves excellent rates of local control. Survival outcomes for patients with oligometastatic disease treated with SABR appear promising, but conclusions are limited by patient selection, and the lack of adequate controls in most studies. The goal of this multicenter randomized phase II trial is to assess the impact of a comprehensive oligometastatic SABR treatment program on overall survival and quality of life in patients with up to 5 metastatic cancer lesions, compared to patients who receive standard of care treatment alone.</p> <p>Methods</p> <p>After stratification by the number of metastases (1-3 vs. 4-5), patients will be randomized between Arm 1: current standard of care treatment, and Arm 2: standard of care treatment + SABR to all sites of known disease. Patients will be randomized in a 1:2 ratio to Arm 1:Arm 2, respectively. For patients receiving SABR, radiotherapy dose and fractionation depends on the site of metastasis and the proximity to critical normal structures. This study aims to accrue a total of 99 patients within four years. The primary endpoint is overall survival, and secondary endpoints include quality of life, toxicity, progression-free survival, lesion control rate, and number of cycles of further chemotherapy/systemic therapy.</p> <p>Discussion</p> <p>This study will provide an assessment of the impact of SABR on clinical outcomes and quality of life, to determine if long-term survival can be achieved for selected patients with oligometastatic disease, and will inform the design of a possible phase III study.</p> <p>Trial registration</p> <p>Clinicaltrials.gov identifier: NCT01446744</p

    Body Composition, Symptoms, and Survival in Advanced Cancer Patients Referred to a Phase I Service

    Get PDF
    Background: Body weight and body composition are relevant to the outcomes of cancer and antineoplastic therapy. However, their role in Phase I clinical trial patients is unknown. Methods: We reviewed symptom burden, body composition, and survival in 104 patients with advanced cancer referred to a Phase I oncology service. Symptom burden was analyzed using the MD Anderson Symptom Assessment Inventory(MDASI); body composition was evaluated utilizing computerized tomography(CT) images. A body mass index (BMI)25kg/m2wasconsideredoverweight.Sarcopenia,severemuscledepletion,wasassessedusingCTbasedcriteria.Results:Mostpatientswereoverweight(n=65,6325 kg/m 2 was considered overweight. Sarcopenia, severe muscle depletion, was assessed using CT-based criteria. Results: Most patients were overweight (n = 65, 63%); 53 patients were sarcopenic (51%), including 79 % of patients with a BMI,25 kg/m 2 and 34 % of those with BMI25 kg/m 2. Sarcopenic patients were older and less frequently African-American. Symptom burden did not differ among patients classified according to BMI and presence of sarcopenia. Median (95% confidence interval) survival (days) varied according to body composition: 215 (71–358) (BMI,25 kg/m 2; sarcopenic), 271 (99–443) (BMI,25 kg/m 2; non-sarcopenic), 484 (286–681) (BMI25kg/m2;sarcopenic);501d(309693)(BMI25 kg/m 2; sarcopenic); 501 d (309–693) (BMI25 kg/m 2; non-sarcopenic). Higher muscle index and gastrointestinal cancer diagnosis predicted longer survival in multivariate analysis after controlling for age, gender, performance status, and fat index. Conclusions: Patients referred to a Phase I clinic had a high frequency of sarcopenia and a BMI$25 kg/m 2, independent o
    corecore